1PC Elbow Double Ferrule Compression Fitting 316 Stainless Steel 30MPa 1/8 1/4 3/8 1/2 6 8 10 12mm Lock * Male BSPT(1 INCH*1 INCH)

1PC ELBOW Double Ferrule Compression Fitting 316 Stainless Steel 30MPa 1/8 1/4 3/8 1/2 6 8 10 12mm LOCK * MALE BSPTMaterial: 316 Stainless SteelStraight fittings are machined from bar stock and shaped fittings from forgings.Application: For inert gas, reactive, flammable, oxidizing and corrosive gases and gas mixtures, Purity max. 6.0.Features1. Sizes range from 1/16" to 1" and 3 mm to 25 mm.2. Precision machined components ensure excellent deformation of the ferrules and tubing.3. Hardened threads with smooth finishing finish avoid galling and help to extend the fitting service life.4. Female nut threads are silver-plated to reduce the friction against the body threads.5. Radius junction design for elbows provides smooth flow path.6. Every fitting is marked with thread type, size and material.7. Assembled easily without the requirement of any special tools.8. Provide a reliable, leak proof seal under severe conditions such as temperature cycling, vibration and pulsation.9. Contribute to productivity improvement because of machined surfaces on the inner finishing.Thread SpecificationsPressure Rating for Pipe End ThreadAllowable pressure ratings for male and female threads are based on ASME B31.3 at ambient temperature.Installation Instruction1. Firmly insert the tubing until it bottoms in the fitting body.2. Finger tighten the nut.3. Mark the nut at the 6 o'clock position, with pencil or scribe.4. Hold the body with a backup wrench, or vice, then tighten nut.5. 1-1/4 turns to the 9 o'clock position.6. The above applies to all fittings from 1/4"to 1"(6mm to 25mm).7. Fittings from 1/16" to 3/16" (3mm to 4mm), only 3/4 turn is required.Tube Fittings are appropriate for Gas Systems, but the implementation of certain standards mentioned below should be adhered to just as in other systems.1. Tubing h

• Material: 316 Stainless Steel
• Size expresses LOCK * MALE BSPT
• Assembled easily without the requirement of any special tools.
• Provide a reliable, leak proof seal under severe conditions such as temperature cycling, vibration and pulsation.
• Contribute to productivity improvement because of machined surfaces on the inner finishing.